CADRE Analytic

CADRE Pro 6 updates and new purchase downloads

CADRE Pro 4, 5 and 6 licensed users only

These updates are complete re-installations.  It is a good practice to uninstall your earlier version prior to installing the updated one.  You will need your serial number the first time you run the update.

New minor version 6.5.1

Version 6.5 is designed for .Net 2.0 and later. You must have Microsoft .Net 2.0 or later installed in order to install this application.

Upgrades and updates

Upgrades and updates to CADRE Pro 6 by download are free for CADRE Pro 4, 5, and 6 registered users. Existing licenses and serial numbers apply.  Contact CADRE Analytic, provide your current CADRE Pro 4, 5, or 6 serial number, and request a password to enter the download site.

Download

CADRE Pro 6.5 (version 6.5.1.0004 ~10.0MB) January 28, 2012

Changes in minor version 6.5.1

Release: Feature added to allow calculation of multiple external load conditions in a single command.
Feature added to provide for shock analysis modal combinations at the element internal load and stress level.
The load assembler feature is modified to allow creation of many combined load cases all at once.
Feature added that provides default gravity constants to apply as needed.

Build 6.5.1.0002: Spectrum file extensions are changed from *.spc to *.rsp to avoid installation issues on machines with certain virus protections (.spc has been adopted by Windows for security certificates).  Both extensions are still supported but .rsp is the default and used for the sample spectrums provided on installation.

Build 6.5.1.0003: Corrected a situation in the forced response module that required all components of force to be checked for every degree of freedom in the excitation node, even when that force component was zero.  Now, only non-zero components of force need be checked irrespective of the mass degree of freedom for the node.

Build 6.5.1.0004: Corrected a bug that caused an 'unhandled exception' when using the Files/Results/Review/Max-min procedure.  This bug sometimes occurred after using the status bar Cancel button before all the selected results files were processed.

  CADRE Geo 6 updates and new purchase downloads

CADRE Geo 4, 5 and 6 licensed users only

Updates are complete re-installations. It is a good practice to uninstall your earlier version prior to installing the updated one. You will need your serial number.

New minor version 6.1

Version 6.1 is designed for .Net 2.0 and later.  You must have Microsoft .Net 2.0 or later installed in order to install this application.

Upgrades and updates

Upgrades to CADRE Geo 6 by download are free for CADRE Geo 4, 5 and 6 registered users.  Existing licenses and serial numbers apply.  Contact CADRE Analytic, provide your current CADRE geo serial number, and request a password to enter this site.

Download

CADRE Geo 6.1 (version 6.1.0001) May 17, 2010

  RESCOL 2 updates and new purchase downloads

Rescol licensed users only

Version 2.1 is designed for .Net 2.0 and later.  You must have Microsoft .Net 2.0 or later installed in order to install this application.

Updates are complete re-installations.  It is a good practice to uninstall your earlier version prior to installing the updated one.  You will need your serial number.

Upgrades and updates

Updates and upgrades to Rescol 2 are free for licensed Rescol users.   Contact CADRE Analytic, provide your current Rescol serial number, and request a password to enter the download site.

Important: You will need your original serial number to download and install the updated version. In the past, some Rescol applications were sold without serial numbers. If you are one of these registered, but un-serialized users, send your information (name and approximate date of purchase) to CADRE Analytic and request that a serial number be issued to you.

Download

 Rescol 2.1 (Version 2.1.0004, December 25, 2008 )

Changes

Build 2.1.1002 added a minor improvement to clarify the nomenclature to facilitate the entry of foundation geometry.

Build 2.1.0003 (Nov 30, 2008) Minor changes to the installer to resolve some installation issues with certain configurations of Windows 7 and Vista 64 bit versions.

Build 2.1.0004 (Dec 25, 2008) Revised the seismic spectrum generator to include a IBC 2006 spectrums.

New version 3

CADRE Flow 3 updates and new purchase downloads

CADRE Flow licensed users only

Version 3.0 is designed for .Net 2.0 and later. You must have Microsoft .Net 2.0 or later installed in order to install this application.

Updates are complete re-installations. It is a good practice to uninstall your earlier version prior to installing the updated one. You will need your serial number.

Upgrades and updates

Updates and upgrades to CADRE Flow 3 are free for licensed CADRE Flow 1 and 2 users.   Contact CADRE Analytic, provide your current CADRE Flow serial number, and request a password to enter the download site.

Download

CADRE Flow 3.0 (version 3.0.1.0002) September 20, 2011)

The new version 3

• Provides for using different temperature, viscosity, and vapor pressure for the fluid in different parts of the system.  See exercise 10 in  help for an example.
• Includes bug fixes
• Improves most existing editing features
• adds the ability to quickly install elements all at once between a multiple set of selected nodes.
• adds the ability to copy elements from one part of the model to another.
• Updated Help, Sample files, and User Manuals

Build 3.0.1.0002 corrects a bug where CADRE Flow fails to detect and report a zero diameter element.

CADRE Profiler updates and new purchase downloads

CADRE Profiler licensed users only

Version 2.2 is designed for .Net 2.0 and later. You must have Microsoft .Net 2.0 or later installed in order to install this application.

Updates are always complete re-installations. It is a good practice to uninstall your earlier version prior to installing the updated one. You will need your serial number.

Upgrades and updates

Updates and upgrades to CADRE Profiler are free for licensed users.   Contact CADRE Analytic, provide your current CADRE Profiler serial number, and request a password to enter the download site.

Download

CADRE Profiler (v2.2.0007 dated April 5, 2011)

Changes

Build 2.2.0002 (March 16, 2009) Changes to the installer to resolve some installation issues with certain configurations of Windows Vista. Inclusion of print and print preview commands for output data.

Build 2.2.0003 (Feb 21, 2010) Resolved issues with the print dialog for Windows Vista and Windows 7.

Build 2.2.0004 (May 9, 2010) Improved the visibility and size of the line direction arrows and added a user setting for arrow size.

Build 2.2.0005 (Jan 11, 2011) Improved the basic shapes generator (Utilities/Merge basic shape) to allow initial setting of the flange radius of most sections in addition to the existing fillet radius.  Additional corner radii can always be set after importing.

Build 2.2.0006 (Feb 23, 2011) Improved the notes imformation window to allow pasting pictures and other embedded objects to the section archive.  Corrected a bug that sometimes prevented section files from being read across the network.

Build 2.2.0007 (April 5, 2011) Revised the system for showing and hiding lines so that individual lines can be selected and temporarily hidden to facilate drawing and editing overlaying or abutting lines.